(04-151) PoE Access Control Switch / Midspan Bridge V2 (excludes Rack Mount PSU)
Borer PoE Access Control Switch / Midspan Bridge V2 (excludes Rack Mount PSU) is an intelligent power distribution equipment, which provides reliable power to entry points up to 300 meters of distance, through a single network CAT5e cable.
Borer PoE Access Control Switch / Midspan Bridge V2 (excludes Rack Mount PSU) is an intelligent power distribution controller, which provides reliable power to entry points up to 300 meters of distance, through a single network CAT5e cable. In addition to acting as a PoE Switch, the 8 Port Controller provides auxiliary power to the system when the mains power fails, by supplying energy stored in batteries.
Borer provides a range of access control solutions using CAT5/6 cable infrastructure and Power over Ethernet technology to deliver both power and data to every access door.
For sites with a small number of access doors we supply the Ethernet Lock Manager which works with 3rd Party PoE Power Injectors and PoE switches (Cisco, HP, etc.).
For larger concentrations of doors the Borer Midspan (combined Power Injector and Switch) supports 300 meter cable runs between the Borer Switch and the door. Both options can be combined in one system.
A three hundred meter runs of CAT 5/6 cable allows very large areas to be covered without the need for additional cabling, booster switches and additional power outlet. This has other advantages which are not available in alternative products such as:
- Establishing an impregnable firewall between doors, inside or outside the building, and the clients LAN.
- Eliminating the need for a mains power spur, reducing the electrical installation cost at each door.
- A single connection to a fire panel enabling the automatic release of fire doors in an emergency.
- Support for security man trap, interlock and air lock (used in data centres, laboratories) door configurations without the need for additional equipment, cabling or expenditure.
- Save on field maintenance as remote monitoring of power consumption and network data activity allows devices in the field to be remotely managed, reprogrammed and power reset when necessary.
The Borer Access Control System is based upon Ethernet, TCP/IP and Power over Ethernet technology so apart from the electric door lock/release installation, all system components can be installed and managed by an IT proficient professional.
PoE Access Control Switch/Midspan Bridge V2 Features:
- Power over Ethernet IEEE 802.3at compatible Power Sourcing Equipment (PSE) to deliver 48 Volts DC power through a 300 meter length of network cable.
- Eight Ports each able to deliver 32 Watts of power, enough energy to control two entry points, with magnetic locks fitted and control equipment.
- Each port has protection for short circuit, polarity reversal and connection of non-compliant PoE devices.
- Real time calendar clock to maintain the time and date on connected devices following a power restart or loss of network.
- Support for a fire alarm input that enables power to selected doors to be disconnected and the door unlocked on a fire alarm.
- Multi-door interlock, full door lock down and door release facility.
Rack Mount PSU
Product Code 02-318: PSU Rack Mount 3U
Product Code 02-319: PSU Rack Mount 2U