Fingerprint or Smart Card PoE Turnstiles
Configuration of PoE Biometric Turnstiles can be enhanced to include solutions for managing visitors and handling emergency evacuation or power failure situations.
Visitor Card Collector
Biometric / card turnstiles situated at the site or building entrance can have a visitor card collector added to the exit direction. This ensures that the visitor’s identity / access card is automatically captured and retained before the visitor can leave site.
Site Emergencies and Evacuation
In case of emergency it is possible to provide unhindered passage by providing free rotation or as an option for tripod turnstiles by dropping the arm.
With a back-up power supply the turnstile, because of the turnstile controller’s very low power requirements, can continue to operate for several hours.
Each biometric turnstile is delivered complete with control electronics and either biometric or card readers. This combination of a single source supply with no split responsibilities, high levels of technology, reduction in component count and complexity, low power consumption and good design ensures ease of installation and maintenance.
Speed of Access
These reliable and compact biometric fingerprint turnstiles are especially suited for applications where the speed of access is important.
Powered over Ethernet
Does not require a separate mains power supply.
Single RJ45 network socket provides network connection as well as operating power.
Minimum of Moving Parts
Two solenoids, a rotor bearing and dampers, ensures the turnstile’s arms are automatically returned to the home position after each rotation.
Click on the videos in action
Each access event is recorded in real time on Borer FUSION Central Management System
Brazil: Sea port perimeter access using Biometric Fingerprint on Card to gain access through PoE controlled full height rotor turnstile.
The FUSION Tru-ID Management Software records all movement through the turnstile in real time. The Biometric PoE Compact Tripod Turnstile controls both ingress and egress using directional arrows on an LCD display.
Middle East: Biometric Fingerprint Membership Access Control Systems in a multi-location fitness club group.
Full Height Clear Biometric Turnstile
A full height clear turnstile, smart in appearance, delivers security without appearing too intrusive or industrial.The Clear-Stile can create single or bi-directional passage ways. Access can be controlled in either one or both directions. The Clear-Stile is intended for installation inside or in a covered entrance. It is delivered with one or two card or biometric reader fitted. One reader manages access and the second egress. Anti-pass-back is supported as the turnstile’s direction of rotation is tracked by sensors to ensure both access and egress events are controlled, recorded and reported.
- Prestigious office buildings
- Administrative buildings
- Government offices
- Business and financial centres and facilities
Full Height Rotor Biometric Turnstile
The Rotor Turnstile is made of powder coated mild steel and delivers a high level of security, suitable for use in perimeter fence line access applications.The Rotor Turnstiles provide single or bi-directional control and are suitable for environments where automated identification and unattended operation is required. Access can be controlled in either one or both directions. The Rotor Turnstile can be installed out-of-doors or under a canopy. It is delivered with one or two card or biometric reader fitted. One reader manages access and the second egress. Anti-pass-back is supported as the turnstile’s direction of rotation is tracked by sensors to ensure both access and egress events are controlled, recorded and reported.
- Unsupervised access gate through Perimeter Fence line
- Industrial Site and Process Plant access
- Access to Residential and Commercial Compounds
- Transportation Terminals and Air and Sea Ports, etc.
Compact Tripod Biometric Turnstile
The Compact Tripod Turnstile uses Power over Ethernet and can be installed indoors or in a covered entrance.
The fingerprint access control turnstile has an LCD display which uses pictograms to give the user feedback. It is fitted with a single card or biometric reader that is able to manage both access and egress. The turnstile’s direction of rotation is tracked by sensors to ensure both access and egress events are controlled, recorded and reported. The reader can be configured to provide controlled access with free egress or to control both access and egress from a single biometric finger print or card reader head.
- Offices and Administrative Buildings
- Schools, Colleges and Universities
- Sport and Fitness Centres, Leisure Centres
- Entertainment Facilities
Box Tripod Biometric Turnstile
A perfect indoor solution for pedestrian access control applications which have limited floor space but need high capacity throughput.
When installed in a line, the turnstiles form passageways without the need for extra guide barriers. It is delivered with one or two card or biometric reader fitted. One reader manages access and the second egress. The turnstile’s direction of rotation is tracked by sensors to ensure both access and egress events are controlled, recorded and reported. The turnstile is fitted with either two readers to control both access and egress or one reader to control access with free egress.
- Industrial Enterprises
- Commercial and Governmental Organisations
- Financial Institutions
- Schools, Colleges and Universities
- Transport Terminals
Visitor and Disabled Access Gate
The gate provides controlled access for visitor and people in wheelchairs. It can be fitted with one or two card or biometric reader, one reader to manage access and the second egress, and with a remote push button or biometric release from the reception desk. The direction of passage is tracked to ensure both access and egress events are controlled, recorded and reported.
- Wheelchair and Disabled access
- Lobby and Reception areas for visitor access
- Sports Centres