Access Control Systems using Power over Ethernet (PoE) Technology from Borer
Borer Data Systems - Power over Ethernet Access Control
 
 

Products & Applications

Borer Data Systems
Borer Products
Borer Data Systems
Borer Products
Borer Data Systems
Borer Products
Borer Data Systems
   
Borer Data Systems
   
Borer Data Systems
   
Borer Data Systems
   
Borer Data Systems
   
Borer Data Systems
   
Borer Data Systems
   
Borer Data Systems
   
Borer Data Systems
   
Borer Data Systems
   
Borer Data Systems
   
Borer Data Systems
   
Borer Data Systems
   
Borer Data Systems
   
Borer Data Systems
   
Borer Data Systems - Access Control | Attendance Management | ID Badge Production | Visitor Management
 
About Us
 
Products
 
News
 
Support
 
Contact Us
 

LIM v4 Controller

3rd Party Door Controller for Card Access Control

Borer’s LIM v4 is a single door access controller for use in online access control applications. The LIM v4 provides full online and offline validation and decision making capabilities at the point of entry.

It supports most third party card reader interfaces, including:

  • Wiegand
  • Magnetic stripe (clock and data)
  • Bar code
  • Dallas iButton
  • Plus many proximity and biometric formats
The LIM v4 was developed using ‘Clean Design’ principles to minimise device mass and reduce energy consumption. Unnecessary components have been eliminated. This together with a low energy profile delivers a ‘cleaner, leaner and greener’ solution, reducing lifetime operating costs.

Features:

  • Dual database of cardholders and access rights held at every reader head, with fall back to the last known good database in the event of a data corruption or interruption during database download
  • Large integrated database with a total capacity of up to 120,000 cardholders/transactions
  • Two magnetically assisted Omron relays for energy efficient switching of electric release and local alarm/alarm shunt
  • Four supervised inputs for door monitor, request-to-exit, tamper and spare
  • Four state monitoring of inputs checking for short circuit, open circuit, normally open and normally closed
  • PIN keypad matrix interface
  • LCD display panel interface optional
  • Works with Borer Midspan Bridge technology which delivers power and data over a single CAT5e/6 cable.

Borer LIM V4 Door Controller for Card Access Control

Part No: 04-149 CAN Legacy Interface Module LIM v4 1MB (DIN Rail Mounting)
Dimensions: 104 x 69 x 20mm / 96g | 104 x 69 x 57mm / 130g (Enclosure)
Capacity: 2x 16,000 to 64,000 Cardholders/Transactions
Power Supply : 10 to 28 Volts DC, 35mA @ 12 Volts DC Quiescent
Download Datasheet: LIM v4 datasheet

For further information on any our products or an info pack, please use the Contact Form or call on +44 (0) 118 979 1137

return to top
Access Control Systems using Power over Ethernet (PoE) Technology from Borer